Mobile
Log In Sign Up
Home > chinese-english > "joint parameter" in English

English translation for "joint parameter"

关节参数面板

Related Translations:
diffractive parameter:  衍射参数
parameter variable:  参数变量
incompatible parameter:  不兼容参数不兼宙参数
wastewater parameter:  废水参数废水特性参数
hydrodynamic parameter:  水动力参数
rest parameter:  剩余参数
solvent parameter:  溶剂参数
goertler parameter:  戈特勒参数
population parameters:  母体参数
battery parameter:  蓄电池参数
Example Sentences:
1.A fuzzy method of identifying joint parameters of mechanical structure
机械结构结合面参数辨识的模糊方法
2.Identification of joint parameters of structures using measured frequency response functions
基于测试频响函数的结构连接参数识别方法
3.The method based on joint parameter estimation shows preferable performance almost at all times , in cases of various number of targets and various type of signal envelope
基于参数联合估计的多目标定位方法在不同目标数目、不同信号包络的定位实验中都有较好的表现。
4.A static / dynamic characteristic test was done to obtain all dynamic parameters of the lathe , then the software ansys for fea was used to simulate and display various vibration modes and natural frequencies with the guide joint parameters taken into account
首先利用静、动态特性实验得出机床的各项动态参数,然后用ansys有限元分析软件模拟和显示机床在考虑导轨结合面参数条件下的各阶模态下的振型和固有频率。
5.According to the modified direct lineal transformation ( dlt ) algorithm , this paper presents a three - dimensional camera meaurement analysis system based on general cameras . moreover , according to the rigid body model of the human upper - limb , a method of calculating the joint parameters of the human upper - limb is presented , which will provide the help for the further research
本论文以直接线性变换( dlt )改进算法为理论基础构建了基于普通摄像机的三维摄像测量分析系统,并根据人体上肢的刚体运动模型提出了一种计算上肢关节运动参数的算法,有利于以后进行更深入的研究。
6.Analysis of nonlinear finite - element for ultimate strength of 81 overlap tubular k - joints with ansys program is carried out in this dissertation . the influence of nondimensional joints parameters , , and ov on failure mode and ultimate strength of overlap tubular k - joints is studied . simultaneously , 27 tubular gap k - joints are analyzed for comparative purposes
分析时考虑了四个无量纲参数,即支管直径与主管的直径之比;主管的直径与壁厚之比;支管壁厚与主管壁厚之比以及支管搭接率o _ v对搭接节点破坏模式和极限承载力的影响。
7.The numerical modeling and calibration considers the following aspects : the element types , the modeling of the weld , the modeling of the members and the behavior of material and geometrical non - linearities . 4 , in the parameterical study , a amount of joints with the variable joint parameters under different load - case are analyized . based on the analytical formula and the experimental and numerical results , design recommendation on the static strength for such connections are proposed
( 4 )参数研究:运用已经建立的数值模型,对平面x型和空间xx型相贯节点在各种工况作用下的静力工作性能进行了大量系统的参数研究,并与现有设计指南和规范进行了比较,从中得出了各节点参数对极限承载力影响的一些规律。
Similar Words:
"joint ownership" English translation, "joint packing" English translation, "joint pain" English translation, "joint pains" English translation, "joint panel on monitoring and evaluation" English translation, "joint parliamentary commission" English translation, "joint partnership" English translation, "joint passage" English translation, "joint patentees" English translation, "joint pathology" English translation